Expand
-
@Martin-Woodford looking at your original post you asked how it is possible that shaping points added to the route where placed in a wrong order.
That can only happen if your route contained some faults like your shaping points not put in the correct order. This happens when you double a piece of the route. That can ben seen by the darker black line in your route.
Please share the url from one of those routes so we can help you. Make sure it's set to public.
The expand function only puts extra points between points from the original@Marinus-van-Deudekom said:
That can only happen if your route contained some faults like your shaping points not put in the correct order.Sorry @marinus-van-deudekom this is not true, when using the expand function it can incorrectly place a point, possibly on top of a bridge / overpass or on the wrong side of a divider on the exit of a round about
These errors will lead to the route changing, sometimes quite significantly -
OK. So here's my original route, (377.32 miles) I hope it's public
https://www.myrouteapp.com/route/open/13569227
When I use expand to add just one more point (15, up from 14) it becomes 480.85 miles and point 8 has been added between poins 5 and 6, both of which are on the correct side of the road. -
OK. So here's my original route, (377.32 miles) I hope it's public
https://www.myrouteapp.com/route/open/13569227
When I use expand to add just one more point (15, up from 14) it becomes 480.85 miles and point 8 has been added between poins 5 and 6, both of which are on the correct side of the road.@Martin-Woodford try deleting the 2 points on the UK side of the channel then use the expand function
I think the ferry / tunnel maybe has something to do with the order / timing in this example getting really mixed up
after I did that then it was just the usual overpass errors -
Hi @brian-mcg
Thank you. Yes, that works. I very much appreciate the experience you've shared in this thread.
However - to the MRA team, the expand function is part of what we pay for. I don't expect to have to rely on the knowledge and goodwill of forum members to make something work properly. -
OK. So here's my original route, (377.32 miles) I hope it's public
https://www.myrouteapp.com/route/open/13569227
When I use expand to add just one more point (15, up from 14) it becomes 480.85 miles and point 8 has been added between poins 5 and 6, both of which are on the correct side of the road.@Martin-Woodford The first impression on opening your route
You can see that the point 6, 7 and 8 are not in a logical order resulting in a dark black line as I suspected
next problem is indeed like @brian-mcg suspected the starting point on the other end off the tunnel / ferry witch resulted in the route being verry long. Deleting the first 2 points will result in the route being expanded like you want. In my case I expanded to 20 points.
-
Hi @brian-mcg
Thank you. Yes, that works. I very much appreciate the experience you've shared in this thread.
However - to the MRA team, the expand function is part of what we pay for. I don't expect to have to rely on the knowledge and goodwill of forum members to make something work properly.@Martin-Woodford I have to put in a good word for the team. As you can see part of the failure was due to a mistake in your route. The other part is that you didn't know that expanding a route in witch a tunnel or Ferry plays a roll, you"ll get strange results. So no mistake by MRA.
Beeing a RouteXpert myself I must confess, witch rarely happens, that I didn't know the Ferry bit myself. -
Absolutely not. This is my original 14 point route
https://www.myrouteapp.com/route/open/13569227 -
The new point number 8 can be identified as an MRA expand point because it's labelled "waypoint" the ones I manually placed have road numbers
-
I don't see how "expanding a route in witch a tunnel or Ferry plays a roll, you"ll get strange results. So no mistake by MRA" can be the case. Why should a tunnel or ferry mean the results are strange ? I'm in Norway at the moment, there are hundreds of tunnels and ferries should I expect strange results everytime one is on my route ?
-
The problem occurs when you expansie the route.
In your original route you can see that the order of the shapingpoints is not logical. See my screenshot. -
Hi @marinus-van-deudekom
Thanks for your comments. The screenshot you show is from the expanded route. This is my original 14 point, 377.32 mile route. In a moment I'll expand it in MRA and screenshot it again (MRA makes the changes in realtime and I don't know how to save versions of the original and expanded route)
-
Hi @marinus-van-deudekom
This is the expanded version. Please note the location of the new waypoint 8 and it's description.
-
I will now reset the original in MRA
-
I don't see how "expanding a route in witch a tunnel or Ferry plays a roll, you"ll get strange results. So no mistake by MRA" can be the case. Why should a tunnel or ferry mean the results are strange ? I'm in Norway at the moment, there are hundreds of tunnels and ferries should I expect strange results everytime one is on my route ?
@Martin-Woodford the web site planner is pretty long in the tooth, you can holler at the moon for what it is worth but nothing is going to be updated with the current version
there are plans for a complete revamp of the web site planner, what the time line is I have no clueMRA is only a small team & they do not have the resources to fix all the old issues like this & also produce a new revamped planner
till the new site update, I am sorry but you will just have to learn to keep an eye on the mileage
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
-
024364
-
06111
-
19215
-
011226
-
27371.9k
-
111634
-
123438
-
0210
