@Lex.Kloet.RX Danke für deine Info! So hatte ich es erwartet und erhofft.

Ik zit in de creatieve sector en met creativiteit vind ik wel mooie routes, maar MRA helpt mij aardig vooruit de met routegenerator om het voorbereidend werk te doen. Maximaal aantal bochten en grootste hoogtes, het vermijden van snelwegen, tolwegen, carpooling en ook wel grote wegen. Ik laat het uittekenen volgens de denkpatronen van TomTom.. Daarna ga ik zelf aan de slag en ga de routepunten automatisch laten vermeerderen, met name 1 waypoint om de 5 km. Ik start ook de vergelijkingsmodus met denkpatronen van Here. Dan ga ik verschillende onderliggende mappen raadplegen zoals Michelin, Google Maps Hhybride enzovoort. Interessant is ook de Open Cyclo Maps erbij te nemen, want toegeven fietsers en mountainbikes rijden ook wel door mooie landschappen en dat kan inspirerend werken. Ik ga ook soms piepen bij de concurrentie, namelijk onze Vlaamse routeplanner RouteYou uit Gent. Het vraagt wat werk, maar als je inzoomt met OSM, zie je ook de mooie kastelen, monumenten, kerken, uitzicht punten en parken in de buurt van de route. Soms kan je ook do door de velden of wijngaarden of bossen rijden : de dirty roads. De TET-paden of ACT-paden raadplegen geeft weer andere inzichten. Je zou een Waypoint-Generator kunnen ontwikkelen dat een scenic route of rondrit opstelt op basis van bijvoorbeeld wijngaarden of kastelen in de Loire streek of de beste uitzichtpunten vanuit je startpunt. Langs rivieren of langs kustlijn of Romaanse kerken of de whisky route in Schotland (kan gevaarlijk zijn) Dankzij super software, want ik gebruik niet graag het woord artificiële intelligentie, kan je hiermee ook aan de slag. Er is met de motorfiets al zoveel te ontdekken in Europa dat je eigenlijk nooit tweemaal dezelfde route hoeft te rijden binnen de ons omringende landen. En inderdaad, zoals hier gezegd is, kan dat lokale bevolking ook tips geven: ik heb het al meegemaakt met Italiaanse boswachters in de bergen. En dan zijn er ook die vele onverhardeimin of meer vlakke wegen met waterplassen en kleine geulen zonder over rotsblokken en boomstammen te moeten rijden met die zware Allroad motorfiets.

@Jem-Cotton said in MyRouteApp (WebPlanner) development Roadmap: Hi. When we had our last interchange about prospects for the web planner, I was cautiously optimistic. Cautious because we've had many promises in the years that I've been using it, of a big nd much overdue overhaul - not tinkering with the appearance, but addressing core usability. In the event, the expected 'announcement this or next month' now feels like a brush off, and accordingly I am feeling cheated that I invested in a lifetime membership in a product that is in effect largely stagnant. It's such a pity as for very little work in real terms, big improvements could be made and the result would I'm sure validate the faith put in the development team by countless lifetime gold membership users. Sorry to sound negative, but we've been here too many times. It could be worse! You could have paid £600 for a Garmin zumo XT for them to leave everyone with no development even when issues are pointed out to them and whats causing the issue they just brush it off and do nothing! At least MRA is getting developed

Nee, in de huidige Web Applicatie is dat helaas niet mogelijk.

@Guzzist said in MRA_Routeplanner - difference between Track and Route-Track?: For me, there is no difference between self recorded Tracklogs to Track. I guess we don't agree on this one... I would hate my ordently managed routes to be spoiled by tracklogs. You can however save a tracklog as gpx, and re-import it as a route-track. Otr just import received tracklogs as route-track instead of tracklog. This way you will find them amongst your routes.

das scheint mir ein interssantes Problem für den Stammtisch https://forum.myrouteapp.com/post/68296 RT

@Brian-McG and @Brett-Bartick and @M.-Schrijver, to add to the confusion I recently learned that since some recent version low resolution tracks are being included to routes. So, my previous claim from about half a year a go is not really valid anymore. Fact is that nowadays, when navigating "track-as-route", you indeed get a track that should look like it was originally planned, instead of being calculated at the time of starting it in navigation. Personally I indeed saw an increase of sync-time that could be explained by this, but I have no clue as to when that started.

@Timo-7 als je op de kaart komt komt daar een vormingspunt. Als je de linker muisknop vasthoudt verschuift de kaart en komt er geen vormingspunt

Just incase anyone is interested, my latest work around is to use Google's mymaps, to overlay annotation on a google maps background with goolemaps functionality. You can share the overlay with others. I've added a screenshot of the overall, plus a couple of 'zoom ins'. Note you can add information to the points, if you look at the ferry port icon that I added, I have been able to link to the ferry sailings schedule. All useful stuff in the early stages of planning, especially if sharing. It's a shame that I can't select the overlay to be visible when planning on myrouteapp. To do it this way would make implementation easier. [image: 1754310742297-screenshot-2025-08-04-at-13.32.19.png] [image: 1754310769658-screenshot-2025-08-04-at-13.32.47.png] [image: 1754310794119-screenshot-2025-08-04-at-13.33.11.png] Steve

@Niels-Elferink selecteer je vriend en klik dan rechtsboven op paginamenu. Dan kun je op routes klikken, that was easy

And here it is https://www.myrouteapp.com/route/open/5768789

@Wallace-Shackleton To verify, just check the kilometers on the waypoint list on the left — the first 200 are written out, and for the rest, the calculation isn’t that difficult (200–400–600). Alternatively, but only with the Gold subscription, you can use the calculator for the distance between two points.[image: 1753774714880-mra.png]

Deep.com translation: Troubleshooting checklist V2.0 To rule out possible operating errors and better identify the fault or problem, it would be helpful to answer these questions. This will give other participants a better overview for developing further steps or a possible solution. Copy the checklist, there is a button top right MRA Web Planning (planning on a PC, tablet, etc. via a browser) [ ] Which subscription do you have? (Basic, Silver, Gold) [ ] Which routing engine was used? (OSM, TomTom, Here, preferred), not overlay map [ ] What is checked in Toolkit Avoid, preferred none [ ] Which vehicle was planned for? (Car, motorcycle, other) [ ] Which options were set (winding/fastest/shortest), preferred none MRA Navigation App (everything on a smartphone, tablet, etc. via the app) [ ] Do you have a Navigation Next subscription? [ ] What hardware, what smartphone is used? (Brand, model) [ ] What operating system does the smartphone run on? (iOS, Android) [ ] What software version is on it? (If not current) [ ] Do you use Android Auto and/or Apple CarPlay? [ ] Which display unit is used for this? (Carpuride/vehicle/other) [ ] Which connection is used? (USB cable or wireless) [ ] What are the navigation settings? (*See post by Hubert Thoring) [ ] Route calculation [ ] Traffic settings [ ] Navigation function [ ] Route validation, opt. [ ] Track navigation [ ] Offline maps [ ] Which avoidance options were used? (Highway, toll road, etc.) [ ] MRA Navigation app route planning [ ] Was a route or track used? [ ] Was the route/track taken from web planning (route directory)? [ ] Navigate as a route or as a track [ ] Was A to B destination planning used? [ ] Which options were used (including curve options)? [ ] Was a round trip planned, including options? [ ] Settings on the smartphone [ ] How are the permissions for the app set? [ ] Location permanently allowed? [ ] Messages/notifications allowed? [ ] Online or offline mode, maps downloaded? [ ] Describe the problem or your question in more detail. _____________________________ [ ] Add screenshots if possible. _____________________________ [ ] The link to the route file may also be helpful. _____________________________ *Contribution by Hubert Thoring https://forum.myrouteapp.com/topic/9564/mra-basis-einstellungen-empfehlenswert Translated with DeepL.com (free version)

@goos-doornewaard lees deze post: https://forum.myrouteapp.com/topic/9487/scenic-routing-routexpert-library-improvements?_=1753646691908

Hello all and sorry for the delay, I was on vacation. We put a little over 2200 miles on in a week. I used MRA all week long and I give it a 90% on performance. I use my phone for the GPS, and yes I place the route points myself. I Like MRA because it allows me to ride the roads I want to take. I have a Garmin in my truck, and my gf has an Iphone. Neither one of these devices show me 10-15 miles away from my home. Also when I use my phone with Google maps it shows me at my home. It only seems to be the MRA app, not sure why. I have also noticed on vacation (we used off line maps due to service issues in the mountains) the arrow strays off the map a lot! When we were on the backroads it did pretty good and kept us on track, in the mountains...WHOO! that thing was all over the place and not giving us accurate directions. I did notice if I use the plus and minus button and scrolled out on the screen it seemed to lock on a little better, but still not great. This could also be a altitude issue? We were high in the Smokie Mountains. I would like to see a feature where if your using off line maps the arrow defaults and sticks to the pre programed route (like my Garmin does).

I had already complained about this issue before, as I am used to other apps where you can search for a point/address without having to add it to the route straight away or first have to laboriously turn it into a POI, which is actually undesirable. Brian's answer showed me the way to the solution. I activated the ‘Ask for waypoint name’ and ‘Place waypoint button’ options. Now, when I search for a point, it is displayed on the map and a window appears at the top for naming this point as a waypoint. I click it away and now have the point I was looking for in front of me without it being added to the route. The ‘Place waypoint button’ option displays a destination marker. If, after checking, I do want to add it to the route, I simply click on the Place waypoint button, the above-mentioned window reappears and I can name it and add it to the route. For me, this is a really good way to do it.

I can understand your wish, but….. if you would place those POI’s automaticly you have realy not a clue if lets say a lunchroom is open.

[image: 1753269557528-immagine-2025-07-23-131841-resized.jpg] OK, the library, but like in this case, there are two routes found in the library, but in reality there are many other routes in the area. Especially if you're looking at areas you're unfamiliar with, it becomes difficult to even find them. How do I find them? Wouldn't it be helpful to have a tooltip that gives me the name when I hover over the track (like it does when I click on the number because there are multiple routes in the area)?

MyRoute-app Training und Workshop in Deutsch https://navi.klein-bild.de/