Skip to content
  • Categories
  • Recent
  • Popular
  • Support
  • MyRoute-app
Collapse
Brand Logo

MRA Community Forum

  1. Home
  2. The MyRoute-app
  3. [App] Problems, Bugs and other Issues
  4. This is routing incorrectly isn't it?!?

This is routing incorrectly isn't it?!?

Scheduled Pinned Locked Moved [App] Problems, Bugs and other Issues
30 Posts 7 Posters 2.3k Views 4 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Tim Watsonundefined Offline
    Tim Watsonundefined Offline
    Tim Watson
    wrote on last edited by
    #1

    So I'm testing MRA via Android Auto on a Chigee AIO-5 (spoiler - what a disaster, back to the Nav6), and I created a test route that routes in a way I wouldn't expect.

    Starting at 1, I'd expect it to route to 2, 3, 4 and then 5 which is a via point. No. It routes 1 to 2 to 3, and at the t-junction after 3 it turns left towards 6. What?! Auto skipping of waypoints was on, but my understanding is that it never skips via points, only shaping points. So why would it turn left after waypoint 3?

    Am I misunderstanding something?

    mra.png

    Marinus van Deudekomundefined CD130undefined 2 Replies Last reply
    0
    • Tim Watsonundefined Tim Watson

      So I'm testing MRA via Android Auto on a Chigee AIO-5 (spoiler - what a disaster, back to the Nav6), and I created a test route that routes in a way I wouldn't expect.

      Starting at 1, I'd expect it to route to 2, 3, 4 and then 5 which is a via point. No. It routes 1 to 2 to 3, and at the t-junction after 3 it turns left towards 6. What?! Auto skipping of waypoints was on, but my understanding is that it never skips via points, only shaping points. So why would it turn left after waypoint 3?

      Am I misunderstanding something?

      mra.png

      Marinus van Deudekomundefined Offline
      Marinus van Deudekomundefined Offline
      Marinus van Deudekom
      Valued contributor
      wrote on last edited by
      #2

      @Tim-Watson Hi Tim
      I guess that there's wrong in your route. If you will share that route here and set it to public we can have a look at it and help you out

      Honda Goldwing GL1500,
      Honda Silverwing GL 650
      DMD2 T865X 8 inch Android tablet using MRA next for navigation
      Garmin XT (almost in the cupboard)
      Samsung S20FE mounted on a Quadlock and using Android Auto in my car

      Tim Watsonundefined 1 Reply Last reply
      0
      • Marinus van Deudekomundefined Marinus van Deudekom

        @Tim-Watson Hi Tim
        I guess that there's wrong in your route. If you will share that route here and set it to public we can have a look at it and help you out

        Tim Watsonundefined Offline
        Tim Watsonundefined Offline
        Tim Watson
        wrote on last edited by
        #3

        @Marinus-van-Deudekom Thanks.

        https://www.myrouteapp.com/en/social/route/9756892?mode=share

        Marinus van Deudekomundefined 1 Reply Last reply
        0
        • Tim Watsonundefined Tim Watson

          @Marinus-van-Deudekom Thanks.

          https://www.myrouteapp.com/en/social/route/9756892?mode=share

          Marinus van Deudekomundefined Offline
          Marinus van Deudekomundefined Offline
          Marinus van Deudekom
          Valued contributor
          wrote on last edited by
          #4

          @Tim-Watson Hi Tim
          Your shapingpoint 6 and especially your viapoint 5 are off the route. My guess is that due to the crossing in the route MRA couldn't determine the right path do therefore skipped viapoint 5 and calculated as it did.
          Could you try it again with the points exactly on the route. To do so make sure you zoom in Max

          Honda Goldwing GL1500,
          Honda Silverwing GL 650
          DMD2 T865X 8 inch Android tablet using MRA next for navigation
          Garmin XT (almost in the cupboard)
          Samsung S20FE mounted on a Quadlock and using Android Auto in my car

          Tim Watsonundefined Con Hennekensundefined 2 Replies Last reply
          0
          • Marinus van Deudekomundefined Marinus van Deudekom

            @Tim-Watson Hi Tim
            Your shapingpoint 6 and especially your viapoint 5 are off the route. My guess is that due to the crossing in the route MRA couldn't determine the right path do therefore skipped viapoint 5 and calculated as it did.
            Could you try it again with the points exactly on the route. To do so make sure you zoom in Max

            Tim Watsonundefined Offline
            Tim Watsonundefined Offline
            Tim Watson
            wrote on last edited by
            #5

            @Marinus-van-Deudekom I'll update the via point and try again. It won't be today as access to that location is now closed, but I'll do it early next week.

            However, because I actually wanted to go to the via point 5 on today's test ride, I had to pull over, run the app on my phone (not android auto) and long-press 5 and tell it to start again from there. It then managed to successfully get to 5 by skipping all the preceeding waypoints. This didn't take it over that junction where the route crosses itself. So at the moment I'm not convinced the placement of 5 slightly off the road is relevant as MRA did manage to navigate there.

            My gut feeling is that it got confused because the circular route crossed and it just figured it could get to the end of the route quicker by simply turning left. But that should be a no-no if it would skip a via point.

            Marinus van Deudekomundefined Stephen Rowlandundefined 2 Replies Last reply
            0
            • Tim Watsonundefined Tim Watson

              @Marinus-van-Deudekom I'll update the via point and try again. It won't be today as access to that location is now closed, but I'll do it early next week.

              However, because I actually wanted to go to the via point 5 on today's test ride, I had to pull over, run the app on my phone (not android auto) and long-press 5 and tell it to start again from there. It then managed to successfully get to 5 by skipping all the preceeding waypoints. This didn't take it over that junction where the route crosses itself. So at the moment I'm not convinced the placement of 5 slightly off the road is relevant as MRA did manage to navigate there.

              My gut feeling is that it got confused because the circular route crossed and it just figured it could get to the end of the route quicker by simply turning left. But that should be a no-no if it would skip a via point.

              Marinus van Deudekomundefined Offline
              Marinus van Deudekomundefined Offline
              Marinus van Deudekom
              Valued contributor
              wrote on last edited by
              #6

              @Tim-Watson Later this evening I'll look at it again on a pc. Maybe I van figure out what caused your trouble

              Honda Goldwing GL1500,
              Honda Silverwing GL 650
              DMD2 T865X 8 inch Android tablet using MRA next for navigation
              Garmin XT (almost in the cupboard)
              Samsung S20FE mounted on a Quadlock and using Android Auto in my car

              1 Reply Last reply
              0
              • Tim Watsonundefined Tim Watson

                @Marinus-van-Deudekom I'll update the via point and try again. It won't be today as access to that location is now closed, but I'll do it early next week.

                However, because I actually wanted to go to the via point 5 on today's test ride, I had to pull over, run the app on my phone (not android auto) and long-press 5 and tell it to start again from there. It then managed to successfully get to 5 by skipping all the preceeding waypoints. This didn't take it over that junction where the route crosses itself. So at the moment I'm not convinced the placement of 5 slightly off the road is relevant as MRA did manage to navigate there.

                My gut feeling is that it got confused because the circular route crossed and it just figured it could get to the end of the route quicker by simply turning left. But that should be a no-no if it would skip a via point.

                Stephen Rowlandundefined Offline
                Stephen Rowlandundefined Offline
                Stephen Rowland
                wrote on last edited by
                #7

                @Tim-Watson I notice on street view that your via point is on a gated road. Although you have been able to place the via point perhaps the algorithm thinks you cannot get to that point. The gate is closed when I look at the street view travelling the opposite way to your plan

                Tim Watsonundefined 1 Reply Last reply
                0
                • Stephen Rowlandundefined Stephen Rowland

                  @Tim-Watson I notice on street view that your via point is on a gated road. Although you have been able to place the via point perhaps the algorithm thinks you cannot get to that point. The gate is closed when I look at the street view travelling the opposite way to your plan

                  Tim Watsonundefined Offline
                  Tim Watsonundefined Offline
                  Tim Watson
                  wrote on last edited by
                  #8

                  @Stephen-Rowland Hi Stephen. Yes, that's another little complication. The route I chose to get to the via point takes you on a public access road through the grounds of a stately home. During the day all those gates are open and you can get into the site one way and out the other, as you can see on the route. It's possible, as you say, that planning the route was not a problem but the navigation software baulks at it. When the software did go direct to point 5 I was already at a location where it went in via the "exit" on the planned route, right near the via point.

                  What I'll do is make a copy of this route and move the via point onto the road as Marinus suggested, but also make a further route that has a similar crossing of the paths but avoids going through the grounds of the stately home.

                  I'll update this thread early next week.

                  I was hoping to use MRA with Android Auto for a 750-mile ride this weekend, but its oddities with a 15-mile test route (along with locking solid and needing the phone rebooting) means I'm back to the Nav6, which is a big shame.

                  Marinus van Deudekomundefined 1 Reply Last reply
                  0
                  • Tim Watsonundefined Tim Watson

                    @Stephen-Rowland Hi Stephen. Yes, that's another little complication. The route I chose to get to the via point takes you on a public access road through the grounds of a stately home. During the day all those gates are open and you can get into the site one way and out the other, as you can see on the route. It's possible, as you say, that planning the route was not a problem but the navigation software baulks at it. When the software did go direct to point 5 I was already at a location where it went in via the "exit" on the planned route, right near the via point.

                    What I'll do is make a copy of this route and move the via point onto the road as Marinus suggested, but also make a further route that has a similar crossing of the paths but avoids going through the grounds of the stately home.

                    I'll update this thread early next week.

                    I was hoping to use MRA with Android Auto for a 750-mile ride this weekend, but its oddities with a 15-mile test route (along with locking solid and needing the phone rebooting) means I'm back to the Nav6, which is a big shame.

                    Marinus van Deudekomundefined Offline
                    Marinus van Deudekomundefined Offline
                    Marinus van Deudekom
                    Valued contributor
                    wrote on last edited by Marinus van Deudekom
                    #9

                    @Tim-Watson Hi Tim
                    Took another glance at it with the PC and then I saw the light:
                    1: You've made the route with the motor profil on
                    2: I changed it to auto witch is the only type you can use at this moment with the Here maps. Then it became quit clear. The route that you wanted to go is beeing altered and giving you the route isues that you had.
                    3 solution: I added a couple of shaping points and that should do the trick.
                    It looks like this:
                    820bcaa2-42a8-4d1a-a478-62946aa15a59-image.png
                    Here's the url to the route I've changed:
                    https://www.myrouteapp.com/route/open/9782354
                    If you have another testrun I think it will provide you want you wanted.
                    My comments in the first responce are nevertheless valid. You can see that I've placed the shaping and viapoint ON the route. Thus making shure the desired route is calculated.
                    make your routes with the auto profil on πŸ™‚

                    Honda Goldwing GL1500,
                    Honda Silverwing GL 650
                    DMD2 T865X 8 inch Android tablet using MRA next for navigation
                    Garmin XT (almost in the cupboard)
                    Samsung S20FE mounted on a Quadlock and using Android Auto in my car

                    Tim Watsonundefined Con Hennekensundefined 2 Replies Last reply
                    0
                    • Marinus van Deudekomundefined Marinus van Deudekom

                      @Tim-Watson Hi Tim
                      Took another glance at it with the PC and then I saw the light:
                      1: You've made the route with the motor profil on
                      2: I changed it to auto witch is the only type you can use at this moment with the Here maps. Then it became quit clear. The route that you wanted to go is beeing altered and giving you the route isues that you had.
                      3 solution: I added a couple of shaping points and that should do the trick.
                      It looks like this:
                      820bcaa2-42a8-4d1a-a478-62946aa15a59-image.png
                      Here's the url to the route I've changed:
                      https://www.myrouteapp.com/route/open/9782354
                      If you have another testrun I think it will provide you want you wanted.
                      My comments in the first responce are nevertheless valid. You can see that I've placed the shaping and viapoint ON the route. Thus making shure the desired route is calculated.
                      make your routes with the auto profil on πŸ™‚

                      Tim Watsonundefined Offline
                      Tim Watsonundefined Offline
                      Tim Watson
                      wrote on last edited by
                      #10

                      @Marinus-van-Deudekom Hey Marinus. Thanks very much for taking the time to have another look.

                      I'm not sure what you mean by the "motor profile". Do you mean the "Transport mode" on the "Start a new route" screen? Possible not, as I can't see an "Auto" option for this. Or do you mean "Auto" as in automobile as in "Car". πŸ™‚

                      Apologies if I'm looking completely in the wrong place!! πŸ™‚

                      If you do mean the problem is that I created the route as "Motorcycle" instead of "Car":

                      1. What is the difference? I've not seen anything in the MRA documentation to say why one would use one type over another
                      2. How does one change the profile for an existing route?
                      3. What did you see change with the route? When I use the bar at the bottom of the route planner to follow my original route, it goes the correct way

                      Thanks again for your time!!

                      Marinus van Deudekomundefined 3 Replies Last reply
                      0
                      • Tim Watsonundefined Tim Watson

                        @Marinus-van-Deudekom Hey Marinus. Thanks very much for taking the time to have another look.

                        I'm not sure what you mean by the "motor profile". Do you mean the "Transport mode" on the "Start a new route" screen? Possible not, as I can't see an "Auto" option for this. Or do you mean "Auto" as in automobile as in "Car". πŸ™‚

                        Apologies if I'm looking completely in the wrong place!! πŸ™‚

                        If you do mean the problem is that I created the route as "Motorcycle" instead of "Car":

                        1. What is the difference? I've not seen anything in the MRA documentation to say why one would use one type over another
                        2. How does one change the profile for an existing route?
                        3. What did you see change with the route? When I use the bar at the bottom of the route planner to follow my original route, it goes the correct way

                        Thanks again for your time!!

                        Marinus van Deudekomundefined Offline
                        Marinus van Deudekomundefined Offline
                        Marinus van Deudekom
                        Valued contributor
                        wrote on last edited by
                        #11

                        @Tim-Watson
                        Hi Tim if you change the settings that's what happens. The motorcycle profil is not usefull at this moment in time>
                        You can change is here
                        a618fe25-fd0d-4124-8804-4d8e61794665-image.png

                        Honda Goldwing GL1500,
                        Honda Silverwing GL 650
                        DMD2 T865X 8 inch Android tablet using MRA next for navigation
                        Garmin XT (almost in the cupboard)
                        Samsung S20FE mounted on a Quadlock and using Android Auto in my car

                        1 Reply Last reply
                        0
                        • Tim Watsonundefined Tim Watson

                          @Marinus-van-Deudekom Hey Marinus. Thanks very much for taking the time to have another look.

                          I'm not sure what you mean by the "motor profile". Do you mean the "Transport mode" on the "Start a new route" screen? Possible not, as I can't see an "Auto" option for this. Or do you mean "Auto" as in automobile as in "Car". πŸ™‚

                          Apologies if I'm looking completely in the wrong place!! πŸ™‚

                          If you do mean the problem is that I created the route as "Motorcycle" instead of "Car":

                          1. What is the difference? I've not seen anything in the MRA documentation to say why one would use one type over another
                          2. How does one change the profile for an existing route?
                          3. What did you see change with the route? When I use the bar at the bottom of the route planner to follow my original route, it goes the correct way

                          Thanks again for your time!!

                          Marinus van Deudekomundefined Offline
                          Marinus van Deudekomundefined Offline
                          Marinus van Deudekom
                          Valued contributor
                          wrote on last edited by Marinus van Deudekom
                          #12

                          @Tim-Watson If you change the transport mode in your route to car you can see yourself what happens.
                          then I added a couple of shapingpoints to force the route the way is was

                          Honda Goldwing GL1500,
                          Honda Silverwing GL 650
                          DMD2 T865X 8 inch Android tablet using MRA next for navigation
                          Garmin XT (almost in the cupboard)
                          Samsung S20FE mounted on a Quadlock and using Android Auto in my car

                          Tim Watsonundefined 1 Reply Last reply
                          0
                          • Tim Watsonundefined Tim Watson

                            @Marinus-van-Deudekom Hey Marinus. Thanks very much for taking the time to have another look.

                            I'm not sure what you mean by the "motor profile". Do you mean the "Transport mode" on the "Start a new route" screen? Possible not, as I can't see an "Auto" option for this. Or do you mean "Auto" as in automobile as in "Car". πŸ™‚

                            Apologies if I'm looking completely in the wrong place!! πŸ™‚

                            If you do mean the problem is that I created the route as "Motorcycle" instead of "Car":

                            1. What is the difference? I've not seen anything in the MRA documentation to say why one would use one type over another
                            2. How does one change the profile for an existing route?
                            3. What did you see change with the route? When I use the bar at the bottom of the route planner to follow my original route, it goes the correct way

                            Thanks again for your time!!

                            Marinus van Deudekomundefined Offline
                            Marinus van Deudekomundefined Offline
                            Marinus van Deudekom
                            Valued contributor
                            wrote on last edited by
                            #13

                            @Tim-Watson
                            14f86cc7-2a52-4f7d-998c-7e0b5060b5c6-image.png

                            Honda Goldwing GL1500,
                            Honda Silverwing GL 650
                            DMD2 T865X 8 inch Android tablet using MRA next for navigation
                            Garmin XT (almost in the cupboard)
                            Samsung S20FE mounted on a Quadlock and using Android Auto in my car

                            1 Reply Last reply
                            0
                            • Marinus van Deudekomundefined Marinus van Deudekom

                              @Tim-Watson If you change the transport mode in your route to car you can see yourself what happens.
                              then I added a couple of shapingpoints to force the route the way is was

                              Tim Watsonundefined Offline
                              Tim Watsonundefined Offline
                              Tim Watson
                              wrote on last edited by
                              #14

                              @Marinus-van-Deudekom Thank you!

                              Wow, by changing the Transport mode from Motorcycle to Car the route length instantly changed from 14.54 to 18.92 miles.

                              I'm really grateful you found that, and I look forward to testing it.

                              However, I'm intrigued why the devs put the Transport mode in, and allowed a default mode other than Car to be set in the user profile, when only the Car profile works with the only map supported by the app?

                              I can see the Transport mode changes something, but is it documented anywhere what is changing? I would expect this route to navigate the same by car, motorcycle or camel! πŸ˜„

                              Marinus van Deudekomundefined 1 Reply Last reply
                              0
                              • Tim Watsonundefined Tim Watson

                                @Marinus-van-Deudekom Thank you!

                                Wow, by changing the Transport mode from Motorcycle to Car the route length instantly changed from 14.54 to 18.92 miles.

                                I'm really grateful you found that, and I look forward to testing it.

                                However, I'm intrigued why the devs put the Transport mode in, and allowed a default mode other than Car to be set in the user profile, when only the Car profile works with the only map supported by the app?

                                I can see the Transport mode changes something, but is it documented anywhere what is changing? I would expect this route to navigate the same by car, motorcycle or camel! πŸ˜„

                                Marinus van Deudekomundefined Offline
                                Marinus van Deudekomundefined Offline
                                Marinus van Deudekom
                                Valued contributor
                                wrote on last edited by Marinus van Deudekom
                                #15

                                @Tim-Watson That I don't know, my camel riding skills are close to none😁
                                Driving by car or motorcycle is the same as far as Here is concerned. The other profiles like motorhome actually have impact on the route.
                                For now just use the car profile and enjoy your rides

                                Honda Goldwing GL1500,
                                Honda Silverwing GL 650
                                DMD2 T865X 8 inch Android tablet using MRA next for navigation
                                Garmin XT (almost in the cupboard)
                                Samsung S20FE mounted on a Quadlock and using Android Auto in my car

                                1 Reply Last reply
                                0
                                • Marinus van Deudekomundefined Marinus van Deudekom

                                  @Tim-Watson Hi Tim
                                  Your shapingpoint 6 and especially your viapoint 5 are off the route. My guess is that due to the crossing in the route MRA couldn't determine the right path do therefore skipped viapoint 5 and calculated as it did.
                                  Could you try it again with the points exactly on the route. To do so make sure you zoom in Max

                                  Con Hennekensundefined Offline
                                  Con Hennekensundefined Offline
                                  Con Hennekens
                                  Alpha tester
                                  wrote on last edited by
                                  #16

                                  @Marinus-van-Deudekom said in This is routing incorrectly isn't it?!?:

                                  My guess is that due to the crossing in the route MRA couldn't determine the right path do therefore skipped viapoint 5 and calculated as it did.

                                  A VIA point is there to NOT be autoskipped. If a waypoint is too far off a road so that it cannot be reached, you will get a warning and the route wil not start at all. So I do not think that is it.

                                  @Tim-Watson, do I understand correctly that you were navigating this route on your Nav6? In that case the device itself chooses how to navigate between waypoints. the (non?) logic to skip WP5 therefore is inherent to the device, not the route. It looks like a really small loop. Maybe there is some logic in the device to prevent those (usually unwanted) loops, I really cant say.

                                  I am just an enthusiastic MRA user, and hope you will be one too!

                                  Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.

                                  Streetpilot 2610 / Zumo 660 / Zumo 395 / CAT S52 + MRA app

                                  Tim Watsonundefined 1 Reply Last reply
                                  0
                                  • Marinus van Deudekomundefined Marinus van Deudekom

                                    @Tim-Watson Hi Tim
                                    Took another glance at it with the PC and then I saw the light:
                                    1: You've made the route with the motor profil on
                                    2: I changed it to auto witch is the only type you can use at this moment with the Here maps. Then it became quit clear. The route that you wanted to go is beeing altered and giving you the route isues that you had.
                                    3 solution: I added a couple of shaping points and that should do the trick.
                                    It looks like this:
                                    820bcaa2-42a8-4d1a-a478-62946aa15a59-image.png
                                    Here's the url to the route I've changed:
                                    https://www.myrouteapp.com/route/open/9782354
                                    If you have another testrun I think it will provide you want you wanted.
                                    My comments in the first responce are nevertheless valid. You can see that I've placed the shaping and viapoint ON the route. Thus making shure the desired route is calculated.
                                    make your routes with the auto profil on πŸ™‚

                                    Con Hennekensundefined Offline
                                    Con Hennekensundefined Offline
                                    Con Hennekens
                                    Alpha tester
                                    wrote on last edited by
                                    #17

                                    @Marinus-van-Deudekom said in This is routing incorrectly isn't it?!?:

                                    1: You've made the route with the motor profil on
                                    2: I changed it to auto witch is the only type you can use at this moment with the Here maps.

                                    Although there have been some problems related to the Motorbike profile, it is absolutely untrue to says that it does not work with HERE maps. It is perfectly usable, even if there are circumstances in which it might be better to use CAR profile instead.

                                    I am just an enthusiastic MRA user, and hope you will be one too!

                                    Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.

                                    Streetpilot 2610 / Zumo 660 / Zumo 395 / CAT S52 + MRA app

                                    Tim Watsonundefined Marinus van Deudekomundefined 2 Replies Last reply
                                    0
                                    • Con Hennekensundefined Con Hennekens

                                      @Marinus-van-Deudekom said in This is routing incorrectly isn't it?!?:

                                      My guess is that due to the crossing in the route MRA couldn't determine the right path do therefore skipped viapoint 5 and calculated as it did.

                                      A VIA point is there to NOT be autoskipped. If a waypoint is too far off a road so that it cannot be reached, you will get a warning and the route wil not start at all. So I do not think that is it.

                                      @Tim-Watson, do I understand correctly that you were navigating this route on your Nav6? In that case the device itself chooses how to navigate between waypoints. the (non?) logic to skip WP5 therefore is inherent to the device, not the route. It looks like a really small loop. Maybe there is some logic in the device to prevent those (usually unwanted) loops, I really cant say.

                                      Tim Watsonundefined Offline
                                      Tim Watsonundefined Offline
                                      Tim Watson
                                      wrote on last edited by
                                      #18

                                      @Con-Hennekens Hi. No, I used a Nav6 before this week, but this week am trying out MRA and a Chigee with Android Auto. It's not going very well. Back to the Nav6 for now. πŸ™‚

                                      1 Reply Last reply
                                      0
                                      • Con Hennekensundefined Con Hennekens

                                        @Marinus-van-Deudekom said in This is routing incorrectly isn't it?!?:

                                        1: You've made the route with the motor profil on
                                        2: I changed it to auto witch is the only type you can use at this moment with the Here maps.

                                        Although there have been some problems related to the Motorbike profile, it is absolutely untrue to says that it does not work with HERE maps. It is perfectly usable, even if there are circumstances in which it might be better to use CAR profile instead.

                                        Tim Watsonundefined Offline
                                        Tim Watsonundefined Offline
                                        Tim Watson
                                        wrote on last edited by
                                        #19

                                        Although there have been some problems related to the Motorbike profile, it is absolutely untrue to says that it does not work with HERE maps. It is perfectly usable, even if there are circumstances in which it might be better to use CAR profile instead.

                                        Can you explain what these problems with the motorcycle profile have been? I can't find anything that says which to use, or indeed which to avoid.

                                        1 Reply Last reply
                                        0
                                        • Con Hennekensundefined Con Hennekens

                                          @Marinus-van-Deudekom said in This is routing incorrectly isn't it?!?:

                                          1: You've made the route with the motor profil on
                                          2: I changed it to auto witch is the only type you can use at this moment with the Here maps.

                                          Although there have been some problems related to the Motorbike profile, it is absolutely untrue to says that it does not work with HERE maps. It is perfectly usable, even if there are circumstances in which it might be better to use CAR profile instead.

                                          Marinus van Deudekomundefined Offline
                                          Marinus van Deudekomundefined Offline
                                          Marinus van Deudekom
                                          Valued contributor
                                          wrote on last edited by
                                          #20

                                          @Con-Hennekens hoi @Con-Hennekens
                                          The advice from the devs is not to use the profile. Like in Tim's case it causes problems that at completely unnecessary. I agree with the devs. Maybe you can explain what would be useful in the bike profile. I could guess like maybe road closures fΓΌr bikes but I experienced that even that doesn't work at this time. What could be the advantage of that profile.

                                          Honda Goldwing GL1500,
                                          Honda Silverwing GL 650
                                          DMD2 T865X 8 inch Android tablet using MRA next for navigation
                                          Garmin XT (almost in the cupboard)
                                          Samsung S20FE mounted on a Quadlock and using Android Auto in my car

                                          Dae 0undefined 1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          • 1
                                          • 2
                                          ACTIVE USERS
                                          Marinus van Deudekomundefined
                                          Marinus van Deudekom
                                          Con Hennekensundefined
                                          Con Hennekens
                                          CD130undefined
                                          CD130
                                          Dae 0undefined
                                          Dae 0
                                          Stephen Rowlandundefined
                                          Stephen Rowland
                                          Dirk Kevin K.undefined
                                          Dirk Kevin K.
                                          Tim Watsonundefined
                                          Tim Watson
                                          POPULAR TOPICS
                                          • Route recalculation
                                            M. Schrijverundefined
                                            M. Schrijver
                                            -1
                                            6
                                            162

                                          • Tracklog anders bij gebruik als laag bij maken route
                                            Marinus van Deudekomundefined
                                            Marinus van Deudekom
                                            0
                                            3
                                            56

                                          • Reverse your route?
                                            Matthew Perkins 0undefined
                                            Matthew Perkins 0
                                            0
                                            3
                                            78

                                          • Another fuel station question...
                                            Marinus van Deudekomundefined
                                            Marinus van Deudekom
                                            0
                                            2
                                            31

                                          • Waypoint names.
                                            Mzokkundefined
                                            Mzokk
                                            0
                                            4
                                            154

                                          • App wil vormingspunt niet verbergen
                                            Nick Carthewundefined
                                            Nick Carthew
                                            0
                                            2
                                            43

                                          • Kompass Nord Ausrichten fix
                                            Hubert Thoringundefined
                                            Hubert Thoring
                                            0
                                            3
                                            33

                                          • Herberekenen route
                                            Con Hennekensundefined
                                            Con Hennekens
                                            0
                                            17
                                            350
                                          MY GROUPS
                                          • Login

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • Support
                                          • MyRoute-app