Drive restriction for vehicle

[Rob Verhoeff]

@Robineke Let’s first establish which sign should apply in order to interpret the rules implemented in the planner. There are different signs for different types of vehicles.

If a road is marked with the sign shown below, no vehicle heavier than the weight indicated on the sign is allowed to use that road. In addition, there are separate signs for motorhomes and trucks with a specified weight limit.

And then that data also needs to be included in HERE’s map data, as HERE is the map provider for the planner. If I enter the weight of your motorhome as the weight for a truck, I actually get a different route at the points you mention.

[Travellexxie]

I guess something is wrong with the camperprofile. Normally you would see a shield on the map with the limitations (that is my experience with my camperholiday in Spain). Switch to the "truckprofile" and you see what I mean. @corjan-meijerink could you have a look at it? I think something is broken.

[Rob Verhoeff]

@Travellexxie When you select the logistics map, you can indeed see that the route the motorhome is being directed over (blue line) is subject to a restriction for vehicles over 3,500 kg. So I agree with your finding.

[Travellexxie]

Another tip: set the weight of your camper 1kg under the maximum weight: not 4500 but 4499. The limitations are "from" a certain weight and not "up to" a certain weight.

[Robineke]

@Rob-Verhoeff indeed it is the sign as you indicated. I am aware of truck limits over 3,5t which are not applicable for campers. This is the sign for all vehicles.
When I come close to the route limitation it indicates."restricted route" but then it is far too late.

[Robineke]

@Travellexxie I am missing your point. The restriction if for vehicle 3,5t. This means no entry for 3,5 ton and higher.
What will differ when I change 4500 into 4499?

[Rob Verhoeff]

@Robineke I think camper-mode has broken in one way or the other as @travellexxie mentioned...

[Travellexxie]

@Robineke I don't think it is suitable for you (are there 4.500 limitations?idk), but here is an example: if your campers weight is max 4.500 and the limitation is 4.500, it will give you no access to these roads. You are only allowed for roads >4.500. That 1kg raise your limitation to the next step. Therefore, in your account, fill in 1kg less.

[Robineke]

@Travellexxie I got your point, I think. My camper weight is 4500kg but the road is limited to 3500kg.
It means that my weight is far higher then allowed so MRA should take that in account.
And that is not what it does only at the latest moment of entry, when I see the sign, it mentions "restricted road".
Unfortunately it does not provide another road and still guids me over the road which is limited to max 3500kg.

[Travellexxie]

@Robineke like I wrote before, something must be broken. In that case you could better use the other profile.