Via point icons not showing on Zumo XT
-
From the Dutch XT FB group
You probably haven't converted your track to the trip planner. Nowadays you can also choose 'Go' when you select the track. You will then get that dotted line to the start or nearest point, but no further indication. You should start the route from the trip planner and not from tracks.
@Hans-van-de-Ven-MRA-Master
I’m using the trip planner (as shaping and via points are nice) - the dotted line is as you stated from where you right now to the first (via) point.
I’m not using tracks and convert them, as I then will lose the points benefits.
The issue I referred to, is the calculation between the second last point (sharping or via) and the finish (via point) marked by a checked flag.
(All in the trip planner)My workaround, right now is to place 2 points nearby the finish flag.... Looking forward for a fix.
/ Henrik
-
@Hans-van-de-Ven-MRA-Master
I’m using the trip planner (as shaping and via points are nice) - the dotted line is as you stated from where you right now to the first (via) point.
I’m not using tracks and convert them, as I then will lose the points benefits.
The issue I referred to, is the calculation between the second last point (sharping or via) and the finish (via point) marked by a checked flag.
(All in the trip planner)My workaround, right now is to place 2 points nearby the finish flag.... Looking forward for a fix.
/ Henrik
I had the same today
️BMW BMW Connected Ride Navigator/Garmin Zumo XT3/XT2/XT//Tourstart/ MyRouteapp (The App)/...
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
I had the same today
️
@Hans-van-de-Ven-MRA-Master said in Via point icons not showing on Zumo XT:
I had the same today
️Sound "good" - and as your status is instructor, you probably have access to elevate this issue to the right programmer people at MRA ?
/ Henrik -
@Hans-van-de-Ven-MRA-Master said in Via point icons not showing on Zumo XT:
I had the same today
️Sound "good" - and as your status is instructor, you probably have access to elevate this issue to the right programmer people at MRA ?
/ Henrik
@Henrik-Müller
I don't know if this is a Garmin or an MRA issue, as I only see this on the XT and not on MRA Navigation. I'm going to test this by putting a route from Garmin Basecamp on my XT.BMW BMW Connected Ride Navigator/Garmin Zumo XT3/XT2/XT//Tourstart/ MyRouteapp (The App)/...
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
@Henrik-Müller
I don't know if this is a Garmin or an MRA issue, as I only see this on the XT and not on MRA Navigation. I'm going to test this by putting a route from Garmin Basecamp on my XT.
@Hans-van-de-Ven-MRA-Master
If I make a new route on the XT device in trip planner, it works as it should.
If the problem is in the XT software when importing GPX into trip planner, MRA must report it to the Garmin SW team, as MRA probably have more “weight” in the approach than a bunch of users...?
-
@Hans-van-de-Ven-MRA-Master
If I make a new route on the XT device in trip planner, it works as it should.
If the problem is in the XT software when importing GPX into trip planner, MRA must report it to the Garmin SW team, as MRA probably have more “weight” in the approach than a bunch of users...?
@Henrik-Müller
Then they probably already know at Garmin, and this will be solved with one of the updatesBMW BMW Connected Ride Navigator/Garmin Zumo XT3/XT2/XT//Tourstart/ MyRouteapp (The App)/...
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
@Henrik-Müller
Then they probably already know at Garmin, and this will be solved with one of the updates
@Hans-van-de-Ven-MRA-Master
Hi Hans
I’m writing the route works if you program the route on direct on the XT device in trip planner - so the Garmin own internally route calculation works.
The issue is starts when I import a ROUTE from MRA into trip planner, then the strange “off road route” between the second last and the last point appears.
I’m glad you have seen it yourself from MRA - How did your test with Basecamp go ?
-
@Hans-van-de-Ven-MRA-Master
Hi Hans
I’m writing the route works if you program the route on direct on the XT device in trip planner - so the Garmin own internally route calculation works.
The issue is starts when I import a ROUTE from MRA into trip planner, then the strange “off road route” between the second last and the last point appears.
I’m glad you have seen it yourself from MRA - How did your test with Basecamp go ?
@Henrik-Müller
I have not yet tested with a route from basecamp ... -
@Hans-van-de-Ven-MRA-Master
Hi Hans
I’m writing the route works if you program the route on direct on the XT device in trip planner - so the Garmin own internally route calculation works.
The issue is starts when I import a ROUTE from MRA into trip planner, then the strange “off road route” between the second last and the last point appears.
I’m glad you have seen it yourself from MRA - How did your test with Basecamp go ?
With a route from BC no problem, given the placement of the next to last route point, it is probably due to the distance between the last and the next to last route point that this will occur.
I added an extra route point and now the route continues as usual.
I'm going to test this further.
I'm going to place this with the developers.
To be continued. -
@Hans-van-de-Ven-MRA-Master
Hi Hans
I’m writing the route works if you program the route on direct on the XT device in trip planner - so the Garmin own internally route calculation works.
The issue is starts when I import a ROUTE from MRA into trip planner, then the strange “off road route” between the second last and the last point appears.
I’m glad you have seen it yourself from MRA - How did your test with Basecamp go ?
Hi Henrik, the route from the last waypoint to the end point is not calculated correctly, that's why you see either the dotted line of the track or a straight (direct route) route line.
It has been reported to the developers, they may need to make a minor adjustment to the .gpx file for the Garmin XT.Thanks for reporting.
-
Hi Henrik, the route from the last waypoint to the end point is not calculated correctly, that's why you see either the dotted line of the track or a straight (direct route) route line.
It has been reported to the developers, they may need to make a minor adjustment to the .gpx file for the Garmin XT.Thanks for reporting.
@Hans-van-de-Ven-MRA-Master
Thanks for your effort - looking forward for this.
A little wish, at the export “connector program” it would be nice if the program remember which GPS/ file format you are using, so it’s preselected...
-
@Hans-van-de-Ven-MRA-Master
Thanks for your effort - looking forward for this.
A little wish, at the export “connector program” it would be nice if the program remember which GPS/ file format you are using, so it’s preselected...
@Henrik-Müller said in Via point icons not showing on Zumo XT:
@Hans-van-de-Ven-MRA-Master
Thanks for your effort - looking forward for this.
A little wish, at the export “connector program” it would be nice if the program remember which GPS/ file format you are using, so it’s preselected...
-
Hi Henrik, the route from the last waypoint to the end point is not calculated correctly, that's why you see either the dotted line of the track or a straight (direct route) route line.
It has been reported to the developers, they may need to make a minor adjustment to the .gpx file for the Garmin XT.Thanks for reporting.
@Hans-van-de-Ven-MRA-Master said in Via point icons not showing on Zumo XT:
Hi Henrik, the route from the last waypoint to the end point is not calculated correctly, that's why you see either the dotted line of the track or a straight (direct route) route line.
It has been reported to the developers, they may need to make a minor adjustment to the .gpx file for the Garmin XT.Thanks for reporting.
@Hans-van-de-Ven-MRA-Master
Have the developers responded, are they also able to reconstruct the scenario? -
@Hans-van-de-Ven-MRA-Master said in Via point icons not showing on Zumo XT:
Hi Henrik, the route from the last waypoint to the end point is not calculated correctly, that's why you see either the dotted line of the track or a straight (direct route) route line.
It has been reported to the developers, they may need to make a minor adjustment to the .gpx file for the Garmin XT.Thanks for reporting.
@Hans-van-de-Ven-MRA-Master
Have the developers responded, are they also able to reconstruct the scenario?
They will work on it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login-
02036
-
0727
-
08267
-
0519
-
010671
-
0483
-
04125
-
1344
