Who can advise me on the most practical way to transfer routes, including POI and via points from MyRoute-app to my ZUMO XT.
I'm working from a MacBook so my ZUMO XT is not recognized on my laptop.
I would prefer not to work via BaseCamp.
When I use Explore I can't impost the .gpx file as a route as it apparently contains too many points that are then reduced to 200 points.
If I use the .gpx 1.1 (route, track, POI) option and I import as track in Explore, the route doubles in length.
If I use the .gpx 1.1 (track, POI) option I only get the track, no via points
These data gets transferred by means of Garmin Drive.
I read somewhere that is should be possible to open a mail attachment with Garmin Drive, but how is that accomplished on an iPhone?
I can't find that option for opening a mail attachment.
Who can help me out?
@Albert-Renting
Ich have an I-Pad and I use it for route planning and route transfer via Garmin drive app to my ZumoXT.
Since the new beta GPX Protocol is available I use it from now. It works good for me and the route is identical to the MyrouteApp calculation. But the import into the Garmin takes much longer than before.
If you have an IPhone you can open the route and save it to your phone. It will be stored in the download folder. Then send the route via share to the garmin drive app.
Kindly regards
Reinhard
ZumoXT, Zumo 590, Montana 700i and Mac
@Reinhard-32
I've tried this and it seems to work!
I have to place these .gpx files in a directory where I can find them with the (in Dutch) 'bestanden' app and then I can send them to the Drive app and then that app will send the .gpx files to my ZUMO XT.
Thanks for the tip!
@Albert-Renting
Hi Albert,
Do you have the latest version of the connector? Try removing the current one so that a new one has to be installed.
Garmin Zumo XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is.
@Hans-van-de-Ven-MRA-Master I installed the latest version of the connector, but my MacBook doesn't see the Garmin XT as a drive and therefore the connector can't write to my Garmin XT.
I think the way I described works best sofar. It seems like a hack, but if it works, it works!
And, for me, it works.
@Albert-Renting The same here with my I-Mac. The connector can’t find the ZumoXT.
https://forum.myrouteapp.com/topic/1231/übertrag-der-routen-track-in-mein-zumo-xt-funktioniert-nicht-mehr/17
Kindly regards
Reinhard
ZumoXT, Zumo 590, Montana 700i and Mac
@Reinhard-32 See my 'work around' mentioned above.
That works very well for me!
@Albert-Renting I already use the „save as gpx file methode“ and transfer the route via Garmin drive app to my ZumoXT.
Check the MTP protocol, maybe this will help
Garmin Zumo XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is.
I don't have a XT. But understand from various reports that communication with the Apple Mac is not without problems.
The Zumo XT uses the MTP protocol for communication with a computer. This means that the options on a Mac are somewhat more limited. Only one program can communicate with the Zumo XT at a time.
Furthermore, Apple does not support the MTP protocol in Finder. So if you want to see the files on your Zumo, you will have to do this with a separate program. For example Android File Transfer. In all cases, other programs may not occupy the Zumo.
@Hans-van-de-Ven-MRA-Master Hans, this was already discussed here:
https://forum.myrouteapp.com/topic/1231/übertrag-der-routen-track-in-mein-zumo-xt-funktioniert-nicht-mehr/11
In addition what I mentioned above I did several test with different setting at my ZumoXT. No success.
The connection app can't find the ZumoXT.
No other Garmin program was running. Therefore I think, some work ist to do with the connection app to work with ZumoXT and the Apple Computers.
he connection app
Kindly regards
Reinhard
ZumoXT, Zumo 590, Montana 700i and Mac
@Reinhard-32 said in Transfer from MRA to ZUMO XT, working from MacBook:
I think, some work ist to do with the connection app to work with ZumoXT and the Apple Computers.
On Apple Mac there is only limited support for MTP devices.
Therefore, I would suggest investigating whether the connection app can connect to Garmin Drive.
But on the other hand; I don't have XT and I don't know if that is the best solution now.
@Jack-van-Tilburg For me it is not a problem. I use primarily my IPad and the Garmin Drive App.
So I save the route as GPX file and send it via Drive app to my ZumoXT or I use my Windows computer.
But the problem has to be solved anyway.
@Reinhard-32 said in Transfer from MRA to ZUMO XT, working from MacBook:
Garmin Drive
I think the Zumo XT was developed by Garmin for use with Garmin Drive. That's why I think the MRA developers should focus on that if they want to solve the problem.
In any case, it would help a lot if MRA now writes a knowledge article about the application of the XT in combination with Apple Mac.
Your clues from this and the other topic can contribute nicely to this.
For what it’s worth, here’s something lifted from a Garmin webpage:
Transferring GPX Files From Your Computer
Apple computers may require additional third-party software, such as Android File Transfer, to read and write files on this device.
If you have already created routes that you want to use on your device, you can transfer GPX files directly from your computer.
Connect the device to your computer (Connecting the Device to Your Computer).
The device appears as a portable device.
On your computer, open the file browser.
Select a GPX file.
Select Edit > Copy.
Browse to the GPX folder on the device.
Select Edit > Paste.
It seems that thinking in terms of MTP in relation to Apple is a bit pointless as that is a Microsoft protocol and the reference to Android Transfer Protocol (AFT) in the above suggests that the XT is Android based. For Garmin to go down such a route seems bizarre to me, and only bound to invite potential conflicts left, right and centre. Given that both Microsoft and Apple desktops and laptops are essentially ‘universal computers’, each capable of running Windows or macOS with relatively little fuss, to have adopted Android seems a major faux pas in terms of inter-operability. Google have even made a clusterwhatnot out of that between their own ChromeOS and Android! (I suspect short term ‘bottom line’ considerations on the part of bean counters have come into play all round, to the detriment of such worthless things as versatility, flexibility and creativity🥴.)
It appears quite possible to achieve mac/XT communication at drive level, but only via one application at a time? In which case, installing AFT and making sure any conflicting application or service is stopped before use might be the way to go here (with heavy emphasis on the stopping of those other apps & services)?
Out of curiosity, I have got myself looking at an issue that doesn’t affect me at all, and is very unlikely to (I probably need to get out more!) Personally, I think the dedicated sat nav has a rather limited future and my current Zūmo 390 will very likely be my last. Spend the money on tyres and petrol I say!
I think the problem is that an Apple doesn't recognize the Zumo XT
Even with Android File Transfer installed?
Hi @PAD-0
Android File Transfer should do the job 
@Jack-van-Tilburg said in Transfer from MRA to ZUMO XT, working from MacBook:
if you want to see the files on your Zumo, you will have to do this with a separate program. For example Android File Transfer. In all cases, other programs may not occupy the Zumo.
I have managed to get my route/track/POI to the ZUMO XT in the following steps:
This should do the trick.
Gr.... Rene
@Jack-van-Tilburg For me it is not a problem. I use primarily my IPad and the Garmin Drive App.
So I save the route as GPX file and send it via Drive app to my ZumoXT or I use my Windows computer.
But the problem has to be solved anyway.
