Issues since the 5.1.0-462 update / Crashes and lag

[Peter Zehentreiter]

@Andries Thanks for your detailed report.

At least you didn’t experience any navigation dropouts, which I find quite remarkable.

My device is still with DHL and will be delivered on Monday… I’ll definitely let you know how it performs for me.

Did you connect the C1 via Bluetooth, or did you connect the controller using a cable?

[Andries]

@Peter-Zehentreiter said:

Did you connect the C1 via Bluetooth, or did you connect the controller using a cable?

i have connect it via bluetooth.
Don't forget to change the setting to F1 and not F2 for MRA.
The controller in combination with DMD2 works beter and is configurable.

[Roland Busenhart]

Today I navigated 500 km in just under 6 hours from the Kassel area back home—a total of 3 crashes: the first after about 1 hour and 15 minutes, the second after about 2.5 hours, and the last one just before reaching my destination. The app closed on my phone, but after reopening it, I was able to continue navigating. Once again, the track log couldn’t be saved. Sent the log files to support this evening.

[Peter Zehentreiter]

@Andries said:

Don't forget to change the setting to F1 and not F2 for MRA.

Are you sure?
Right now my C1 is set to F2 and is working just perfect.

[Andries]

@Peter-Zehentreiter said:

@Andries said:

Don't forget to change the setting to F1 and not F2 for MRA.

Are you sure?
Right now my C1 is set to F2 and is working just perfect.

sorry...
F1 is for the use with DMD navigation... Think the heat is getting me...

[Peter Zehentreiter]

@Andries All right then...
I’ve got it...
It’s too hot here for motorcycling too.

[Peter Zehentreiter]

@Andries According to the information I have, there should be a function or app on the NOR7E called ‘manage’. This app controls the hardware components.

In the ‘controller’ settings, the cable connection should be disabled; this prevents conflicts between the cable and Bluetooth.

If you opt for the cable connection, you’ll be too tied to the DMD system and limited to certain apps.

[Andries]

@Peter-Zehentreiter said:

@Andries According to the information I have, there should be a function or app on the NOR7E called ‘manage’. This app controls the hardware components.

In the ‘controller’ settings, the cable connection should be disabled; this prevents conflicts between the cable and Bluetooth.

If you opt for the cable connection, you’ll be too tied to the DMD system and limited to certain apps.

Yes that is correct for as far i can remember. Thats why i use bluetooth so i can switch between f1 and f2. The dmd2 nav uses f1 and mra uses f2. As long as the temperature outside is below 32°C. I can work with mra.
If you try dmd2 and there upgrade dmd2 next has some interesting features for planning and interface that you can setup like you want. The next is still in progress but looks nice and smooth to navigate.

[Peter Zehentreiter]

@Andries Thank you for your confirmation.

I received the NOR7E yesterday and have already installed and set everything up.

The Bluetooth connection to the C1 is also set up.
F2 works with MRA
F1 works with DMD 2

I just need to look into the commands for DMD 2 in more detail, as some of the actions are different here compared to MRA

[Massimo Cardone]

I check the Play Store every day, hoping to see an update for MRA, because on Wednesday morning we’re setting off on the Routes des Grandes Alpes, and if the app keeps crashing – as it has done so far – it won’t be any fun and I’ll be annoyed.

And it won’t just be me who’ll be annoyed, but also my four friends, who all use MRA too. Oh well, we’ll see – as they say, hope dies last.