Route not transferring to Zumo XT

[Karl Foley]

Thanks both.
Thanks for trying my test route. Must be some other issue

Nomko - Just using my-route app and Garmin drive, not next navigation.
Why do you mention hotspot ? Is Bluetooth the only communication needed to transfer a route ?

[Nomko Nomden]

Just using my-route app and Garmin drive, not next navigation.

The MyRopute App on your mobile phone? Tha is the MRA Next app.

Why do you mention hotspot ?

I have my mobile phone connected to my Garmin Zumo XT using Bluetooth and hotspot.
The hotspot is for having a (mobile) internet connection for the XT through me mobile phone.

Is Bluetooth the only communication needed to transfer a route ?

No, you can use wifi as well. At home i have my XT connected to my home network. I connect my XT to a poweradaptor and have it updated through my wifi network at home for example. During rides i use the hotspot connection on my mobile phone to have internet on my XT so i can receive (traffic) information for instance.

Uploading GPX files from yopur mobile phone to your XT can be done through wifi or through Bluetooth.

[Karl Foley]

Fixed - I did a full reset on my XT. Cleared all user data, re-setup and connected to my phone again.
Files transfer quickly but more importantly - calculate & convert to Trips when asked.
Thank you folks for checking my file. Cheers

Side question - to make sure the XT travels along the route I decided - avoidances set to No tolls/motorways, transfer to a Trip, have plenty of waypoints and have Navigation off-route-calculation set to "off" ? is this the correct setup, without the XT deciding on a quicker/faster route and adjusting it ?

[Karl Foley]

False hope. I successfully transferred one route, left it for a while and the same error (no calculation) on another route.
Looks like I have to reset & setup the XT each time to transfer a route successfully, for the XT to calculate it. Anyone seen this before ?

[Nomko Nomden]

@Karl-Foley said in Route not transferring to Zumo XT:

False hope. I successfully transferred one route, left it for a while and the same error (no calculation) on another route.
Looks like I have to reset & setup the XT each time to transfer a route successfully, for the XT to calculate it. Anyone seen this before ?

What kind of reset did you do? A soft reset or a hard reset back to factory standards? The last reset works most of the times fixing strange issues i noticed.

Back to standard factory settings and then AS A FIRST!!! install all updates. And then start setting up the device to your own wishes and needs.

[Karl Foley]

I did a "delete data and reset settings", with no updates (as I am at work). Routes initially load up fine. But after a few tests, back to no transfers.
When at home later, I will do a reset again and then install all updates, and see what happens with transfers after that.
will report back. Thanks again.
at least I know the GPX files work and are good, so that eliminates that part.

[Nomko Nomden]

Make sure to use the 1.1 gpx file not the 1.2.

[Bouke Ent]

did you check if all your maps are good. i had 3 months ago that update did not went ok and i had to reinstall maps with garmin express.

[Karl Foley]

Hi. Did a full reset. All updates installed. Two routes loaded fine. Then turned It off.
It seems that when it's turned off and back on again it doesn't like to transfer.
I tried the route I posted above, known good route, but no luck.
Kinda lost - any other options.

[Reinhard-32]

Are all maps (CityNavigator 2026.20 north and south) propper installed and ticked on.
Please check it in the settings on your ZumoXT.

I have imported your route in my ZumoXT without any problems.

[Karl Foley]

@Reinhard-32 yep, all ticked and up to date.

Even my simple route posted above won't transfer. It probably will if I do a full reset and setup again. But that's not workable.

Baffled

[Karl Foley]

Well - the maps are ticked - properly installed?? How do I uninstall and reload them ?

[Bouke Ent]

@Karl-Foley said in Route not transferring to Zumo XT:

Well - the maps are ticked - properly installed?? How do I uninstall and reload them ?

you can not uninstall but you can reinstall via garmin express.

you also can try to remove bleutooth connection and reinstall garmin drive.

also it is good to try to set gpx file off route direct on xt in gpx map. if then the xt sees the new file and can calculate that it has somthing to do with transfer by garmin drive or bleutooth

[AWDC LAO]

Before starting your trip, always upgrade, update, reset, control, restart ... your software, iOS, maps, layers, devices, headset, trackers, batteries, tires.... and finally yourself and your mind.

[Karl Foley]

Hi folks, looks like I have it fixed. I had all the following maps ticked - CN EUROPE NTU (FOURSQUARE), TOPO EUROPE CENTRAL, TOPO EAST & WEST, CN EU NTU (PARKOPEDIA), EUROPE DEM, CN EUROPE NTU (NORTH & SOUTH).
So I cleared them all, restarted the XT, added just the North & South and it worked fine. But would not create a Trip until I added the Foursquare item (which has the POI).
So looks like that was the issue, or one map was corrupt. I don't need the Topo maps. I may test it out after the trip, to see what ones are causing the issue, but ok for now.
Thanks folks for testing out y orig route

cheers
K

[Skellum]

On the Garmin XT, you should not have more than one routable set of Maps ticked - ie., Only the CN North & South, or there will always be issues when trying to load and run your routes on the unit.

[Marinus van Deudekom]

@Karl-Foley I hope that it works out fine for you because Foursquare is a known problem starter