Hello everyone,
I've been using the Remotek One with an iPhone Xr for a while, and it still has version 1.x.x.
With the new MRA version from V4.3.6 it works very well now, and skipping WP now works with my solution.
Important: Under Settings on the iPhone!!
- Under: Accessibility \ Keyboards & text input \ set the keyboard control to "Off". Otherwise I have the problem that the MRA crashes outside of navigation. But with the setting selected here to "Off" it always works very well.
With the MRA input setting, then as a Remotek One, the following works very well, but you have to make sure that the BT Remotek One keyboard is set to iOS, i.e. press the two arrow keys at the top and bottom together and wait to see if it flashes red and green for iOS. If it's green and green you have to repeat it again and then the red and green flashes briefly. "red, green stands for BT button as iOS" because "green, green stands for BT button as Android.
Result of my application in the MRA navigation under iOS:
- Arrows "left, right, up, down," pan over the map.
- Arrow "+" / "-" corresponds to zooming
- Arrow DC right, click twice quickly then release, = skip WP.
- and other functions which I will describe separately....
The correctly selected basic settings are important, if the above does not work, the BT keyboard must be reset once by pressing "arrow up, and + and -" at the same time for more than 5 seconds until it flashes red. Then delete the pairing under BT in the iPhone and pair it again on the iPhone. Then set it up for iOS as described above, etc.
Good luck, I am very happy with my iOS solution.
Best wishes from Münster
Hallo zusammen,
ich hab ja schon länger das Remotek One mit einem iPhone Xr im Einsatz, dieses immer noch mit der Version 1.x.x.
Mit der neuen MRA Version ab V4.3.6 geht es jetzt sehr gut, auch das WP überspringen geht jetzt mit meiner Lösung.
Wichtig: Unter Einstellungen am iPhone !!
- Unter : Bedienhilfen \ Tastaturen & Texteingabe \ die Tastatursteuerung auf "Aus" zu stellen. Ich habe sonst das Problem das die MRA außerhalb der Navigation abstürzt. Mit der aber hier gewählten Einstellung auf "Aus" geht es immer sehr gut.
Bei der MRA Eingabeeinstellung, dann als Remotek One geht folgendes sehr gut, dabei ist aber darauf zu achten das die BT Remotek One Tastatur auf iOS steht heißt, die zwei Pfeiltaste oben unten zusammen drücken und warten ob es kurz rot, grün für iOS blinkt, bei grün, grün muss man es noch einmal wiederholen dann kommt das kurz rot, grün blinken. "rot, grün steht für BT Taste als iOS" denn "grün, grün steht für BT Taste als Android.
Ergebnis bei meiner Anwendung in der MRA Navigation unter iOS:
- Pfeile "links, rechts, oben, unter," über die Karte schwenken.
- Pfeil "+" / "-" entspricht dem Zoomen
- Pfeil DC rechts, zwei mal kurz klick dann loslassen, = WP überspringen.
- und weitere Funktionen die beschreibe ich aber separat....
Wichtig sind die richtig gewählten Grundeinstellungen, wenn das oben beschriebene nicht gehen sollte muss die BT Tastatur einmal resettet werden indem man "Pfeil oben, und + und - " gleichzeitig für mehr als 5sek. drückt, bis es rot blinkt. Danach auch die Kopplung unter BT im iPhone löschen und neu am iPhone koppeln. Danach dann wie oben beschrieben für iOS einstellen usw.
Viel Erfolg, ich bin für meine iOS Lösung damit sehr zufrieden.
VG aus Münster